The gas stove is blocked. What happened?

The gas stove is blocked, and the following situations may occur:

1. Gas pipeline blockage: If certain impurities and sediments accumulate in the gas pipeline, the gas flow will be blocked, and the gas normally used by the gas stove cannot be supplied. At this time, it is necessary to clean or replace the gas pipeline.

2. The gas regulating valve is damaged: the gas regulating valve of the gas stove regulates the gas flow to a proper level. If this valve fails, it will not be able to supply gas to the cooker, and the damaged valve needs to be replaced.

3. economizer problem: in addition to the gas regulating valve, there is also a very important component on the gas stove, which is the economizer. If there is something wrong with the throttle on the gas stove, it will affect the gas in and out, resulting in the gas stove being unventilated and needing to be replaced.

4. Igniter problem: the igniter of the gas stove is damaged or out of order, the gas cannot be ignited, and the cooker cannot be used normally. The igniter on the gas stove needs to be replaced.

5. Other reasons: It is also possible that the gas stove has been used for a long time, and too much oil residue or other impurities are attached to the inside of the stove, which leads to the blockage of the gas pipeline or the accumulation of too many impurities in the stove and needs maintenance or cleaning.

In short, when the gas stove is not ventilated, first eliminate the problems such as pipes, and then check the possible fault points one by one for maintenance or replacement. Only in this way can we ensure that the gas stove can provide normal use effect. At the same time, we should pay attention to regular cleaning and maintenance to avoid similar problems.