What's the matter with Beijing Hyundai Leading 1.4t high-speed accelerator pedal?

The reason why Beijing Hyundai leads the 1.4t high-speed accelerator pedal to the end is that there is something wrong with the accelerator pedal of the car.

Because when you step on the accelerator, the cable will drive the accelerator, that is, the accelerator. There is a position sensor on the throttle. The control unit knows the throttle opening according to the signal of the throttle position sensor, then calculates the corresponding signal voltage, and finally calculates the fuel injection quantity of the vehicle according to this signal voltage.

If the throttle position sensor is too dirty or the voltage is unbalanced, the electronic throttle will fail, and the speed will not go up when the throttle is stepped to the bottom. If the fault of electronic throttle is eliminated, we should turn our attention to the intake system, oil circuit and ignition system of the engine. If any part of a system fails or is abnormal, it may lead to the situation that the accelerator of the car cannot step on the speed.

Beijing Hyundai Leading Configuration

Start the vehicle and drive 1.6 liter vehicle on asphalt pavement. Under the action of in-cylinder direct injection technology, the maximum output power of 95.3Kw is provided, and at the same time, abundant power does not affect fuel consumption. The fuel consumption of the 1.6L model is lower than 6L after being tested in different road conditions such as urban congestion, high-speed cruise and Panshan Highway.

In addition to the 1.6L model, it is also equipped with the 1.4T model. The turbocharging and in-cylinder direct injection technology of 1.4T engine provided it with a high torque output of 210.8n m before it went to Panshan Highway in Wild Elephant Valley. With the cooperation of 7-speed DCT dual-clutch gearbox, the gearbox has active and flexible response speed, abundant power and high torque output, and aggressive sports driving mode.