How long does it take to clean the valve?

In 30 minutes, there are two kinds of throttles: traditional wire-controlled throttle and electronic throttle. The traditional engine throttle control mechanism is controlled by steel wire (soft steel wire) or pull rod, one end of which is connected with the throttle pedal and the other end is connected with the throttle linkage plate. The electronic throttle mainly controls the opening of the throttle and adjusts the air intake through the throttle position sensor according to the energy required by the engine. It takes about 30 minutes to clean the valve. Refer to the following operation for specific steps: 1. Remove the negative terminal of the battery to prevent short circuit. 2. Remove the air filter and air duct. 3. Remove the connecting rod and connecting wire of the throttle valve, and remove the throttle valve from the intake manifold. 4. Disassemble the throttle and separate the upper and lower parts. Clean with gasoline. Then wipe it repeatedly. 5. Brush the outer surface of the throttle thoroughly with a brush. 6. Gently wipe the throttle surface. Then reassemble the two parts of the throttle valve, and then reinstall the throttle valve on the intake manifold. 7. Connect the connecting rod and cable, and put the air filter and air duct back to their original positions. 8. Reinstall the negative port of the battery. Throttle is a control valve that controls air to enter the engine. After the air enters the intake pipe, it is mixed with gasoline to form a combustible mixture, which is burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. Throttle four-stroke gasoline engine is roughly such a story. Throttle is one of the most important components in EFI automobile engine system. Its upper part is the air grille of the air filter, and the lower part is the engine body, which is the throat of the automobile engine. Whether the acceleration of a car is flexible or not has a great relationship with throttle pollution. Throttle cleaning can reduce fuel consumption and make the engine flexible and energetic. Whether the accelerator should be removed for cleaning is also the focus of discussion among car owners.