Is it necessary to re-match Golf 4 with a computer after changing the clutch switch?

1. After connecting the read data with 43 1 equipment, click to enter the automatic transmission system directory. Click "Basic System Adjustment" to enter, enter the group number 060, and click OK. 3. At the border of channel number.

2. Observe that the second and third groups of data on the channel number interface gradually change from 0 to about 0. At this time, the vehicle needs to be started, and the whole process needs to be braked until the basic settings are completed. In the second and third data streams, it can be seen that the value first rises from greater than 0 and then falls to 0. At this point, you can exit the system and start the vehicle test run again.

3. The transmission wrench light of the vehicle instrument is on. After inspection, the gearbox electromechanical unit is faulty and needs to be replaced. Note that when replacing the gearbox electromechanical unit, the gear must be set to neutral. Methods Remove the gear lever cover above the gear box and adjust it to neutral position with a screwdriver.