How to adjust the forward speed of Wuling glory car

The toe-in of the front wheel can be adjusted by changing the length of the tie rod. In the process of adjustment, the distance difference between the front and rear wheels can meet the toe-in value specified in the measurement position specified by the automobile manufacturer, and generally the toe-in value is between 0 ~ 12 mm, which is normal.

If the tie rod of the car is straight, you can loosen the locking bolts of the joints at both ends of the tie rod and twist the tie rod with a pipe wrench to make the tie rod longer or shorter. When the pull rod is extended, the toe-in value increases, the pull rod is shortened and the toe-in value decreases. Tighten the bolts until the toe-in meets the standard.

If the tie rod of the automobile is bent, the tie rod cannot be rotated during adjustment, but the sliders at both ends of the tie rod should be rotated. Because the pitch of the left and right ends is different, the tie rod joint on one side should be rotated first when adjusting.

If one lap exceeds the toe-in value and one lap does not meet the requirements, you can turn the tie rod joint on the other side again to adjust it to meet the requirements. Tighten the locking bolt after adjustment.