What is the function of cleaning agent for air intake system?

The following is about "What is the function of the cleaning agent in the air intake system?" Related introduction:

The role of cleaning agent in the intake system is to completely remove the carbon deposit and colloid in the intake manifold, throttle and combustion chamber. The cleaning agent for air intake system refers to the special cleaning agent for cleaning the air intake system of various gasoline vehicles and diesel vehicles.

The use method of cleaning agent for air intake system is as follows:

1. Clean the cleaning agent with the cleaning equipment of the fuel system, start the engine to run at idle speed until the engine is at working temperature, and then turn off the engine;

2. Open the intake pipe from the nearest air door;

3. Screw the quick connector onto the cleaning tank and insert the rear end into the air inlet pipe;

4. Start the engine to make it in a high idle state;

5. Quickly connect the pipe joint to the quick joint, and turn the cleaning agent tank upside down;

6. Keep the rotating speed at1500rpm, and clean up the carbon deposit in the engine air intake system;

7. Shut down the engine after cleaning and reconnect the air inlet pipe;

8, directly added to the fuel tank, generally can add 60L-80L fuel per bottle.