Manufacturing technology of firewood stove

The manufacturing process of the firewood stove is as follows:

First of all, cement, lime and water should be prepared in the correct proportion. Secondly, bricks are used to build the basic framework of firewood stoves. Then, after the framework is completed, the division of the stove is determined according to the size of the pot. Then, after dividing, smooth the stove with cement slurry. It can be used when it is finally dry.

Matters needing attention in using wood stove

1, not too full, refueling must be more than 3cm away from the position of the barrel mouth, and finally, the first filling amount should be controlled just before use.

2. In order to better ignite, an easy-to-ignite match should be placed above the fuel.

3. After cooking, the remaining fuel in the barrel must be used up, or the wind can be turned off after taking out the barrel. Pay special attention not to put out the fire directly on the stove.

4. After the fuel is used up, you can take out the bucket with the installation hook and clean up the burnt ash. You should also pay attention to the rural firewood-saving stoves that are safe and fire-proof.