How to reset the magotan car condition check?

First, turn on Blink, and then press the button on the right side of the odometer. When the key is turned on, "Reset is possible" will be displayed on the dashboard. Press the ok key on the handle to reset. The replacement method of Magotan car condition inspection is as follows: 1. Turn off the ignition switch, press the zero/adjust button, turn on the ignition switch, close the ACC gear, release the button, press the button in the lower left corner of the instrument panel until a black screen is displayed, and then press the inching switch 2. When checking the vehicle condition, the owner should be reminded to carry out actual maintenance. Car owners must pay attention to the maintenance of auto parts during the maintenance period. For example, engine oil, engine oil filter and air filter must be replaced after driving for 5,000 kilometers. After driving 10000 km, in addition to routine maintenance, air conditioning filter and gasoline filter should be replaced. When driving 20,000 kilometers, in addition to routine maintenance, the accelerator of the three-way catalytic converter should be cleaned and four tires should be replaced.