How many kilometers does Honda Jade clean the throttle?

The disassembly and cleaning methods of Honda Emerald throttle are as follows:

Remove the throttle as follows:

1. Remove the connector and pliers of the air inlet pipe and the empty filter box.

2. Remove the crankshaft ventilation pipe and use the T20 internal wrench.

Open the empty filter box and break it by hand, then you can clean the upper part of the throttle valve. If you want to clean it thoroughly, please remove the four screws to remove the throttle valve.

The cleaning method of throttle valve is as follows:

Step 1: Prepare tools: 10 small wrench (disassemble battery terminal), large Phillips screwdriver (disassemble air inlet elbow), T30 internal wrench (disassemble throttle) and a bottle of carburetor cleaner.

Step 2: Remove the throttle inlet elbow.

Step 3: Unplug the throttle harness plug.

Step 4: Remove the throttle body.

It is suggested that the automobile throttle function: the intake air is controlled by the throttle position sensor and the fuel quantity is automatically controlled. In other words, it is a device that controls the throttle.

Classification: one is to control the semi-mechanical and semi-electronic throttle through cables, and the other is to calculate the relationship between throttle opening and intake air volume and sensor angle through signals sent by sensors, that is, full electronic throttle.

The throttle valve is in danger of being unclean.

1. Unscheduled cleaning will lead to wrong throttle opening.

Second, it will cause air with impurities to enter the engine combustion chamber.

These two results lead to abnormal engine operation, mainly manifested as unstable idle speed; Sudden and instantaneous stall at high speed (the feeling that the throttle suddenly closes); Power drop; In severe cases, it will cause difficulties in starting and increase fuel consumption.

Million car purchase subsidy