LaVida accelerator cleaning course

Volkswagen LaVida throttle cleaning process and matching method are as follows:

1. Open the engine cover, disconnect the negative electrode of the battery, and remove the air inlet of the automobile engine to expose the throttle;

2. Unscrew the stable screw around the full throttle stroke, unplug the throttle plug and insert the vehicle wiring harness;

3. Remove the total throttle stroke, put on rubber gloves and clean with throttle cleaner;

4. After cleaning, reassemble it according to the process of just disassembling and assembling, and carry out throttle matching below.

The throttle needs to be initialized after cleaning, because it has a memory function when adjusting the throttle opening on the computer. In addition to using special encoders and decoders to match the throttle, it can also be done by manual operation. There are two methods for manual operation. The first one is to turn on the "ACC" power switch of the key, then wait for 20 seconds, feed the oil just right, and keep it 10 second up and down, then turn off the throttle, turn off the starting motor, pull out the key and initialize. The second method is to turn on the "ACC" power switch of the key for 30 seconds, then turn off the starting motor and pull out the key. If the above two methods are not suitable, please go to the auto 4S shop for matching work immediately.