Can floor tiles be laid in low temperature environment? What should I pay attention to?

It depends on the specific temperature, if the temperature is higher than 5 degrees, the impact is not great; If it is lower than 5 degrees or even 0 degrees, try not to paste it, otherwise the temperature will rise in the coming year, and the tiles will bulge empty, causing rework, which is not worth the loss. The first factor affecting the laying of floor tiles in winter is that the indoor temperature is too low, sometimes below zero. If the temperature is too low, there will be two adverse effects: the first effect is that these materials such as cement mortar are not paved well in winter, and the temperature is low, and the cement mortar sets slowly and is easy to empty. If the gap between bricks is small, the expansion coefficient of tiles (thermal expansion and cold contraction) is high, and the high temperature in summer will arch.

In fact, the requirements for laying floor tiles are very high. Compared with the empty wall, floor tiles are more difficult to maintain, and it is best not to be too cold when laying floor tiles. Don't walk on the surface of the tile before it is dry, and check whether there is empty drum after the tile is laid. Under normal circumstances, as long as the seam is left, it is basically not a problem! My home was posted in winter! At present, there is no problem in laying indoor tiles, and it is not affected in places with warm winter climate in the south, such as Guangdong, Guangxi and Hainan. And places with low temperature in winter should be avoided as much as possible. Because of thermal expansion and contraction, it is easy to arch when the temperature is high in summer. Similarly, in order to ensure that the temperature difference of ceramic tiles is too large, some antifreeze can be added to the material. When mixing mortar, the water temperature shall not exceed 80℃.

This is something to pay attention to when laying tiles in winter. When preparing for decoration, first give the tiles cold and warm, usually moving indoors to make their temperature reach room temperature. At the same time, the tiles to be used must be soaked in enough water to prevent the tiles from being laid with new technology in dry weather. Because cement mortar is not used in the whole process, there is nothing to worry about, because the glue used for laying tiles is completely mechanical and has no strict requirements on temperature. The only thing to consider is the coldness of the tiles.