How to exhaust the water temperature in Jie Jun, China?

1. The water temperature rises during driving, and the car cannot continue driving. Park the car in a safe place.

2. Turn on the hazard warning light, wait 15 minutes, and let the engine cool itself. During this time, you can look for water.

3. Open the big cover of the glory car and slowly open the cover of the expansion kettle wrapped in cloth. When opening the lid, be sure to unscrew it slowly to prevent the hot air from rushing out and hurting people. After filling the expansion tank with water, open the passenger seat. Remove the clamp on the throttle outlet pipe with pliers. Originally, the water in this pipeline was in a flowing state. Because the water temperature is high, it is full of gas. Be careful not to get burnt by hot air when removing the pipeline.

4. When water flows out of the throttle outlet pipe, you can start the engine and continue to add water to the expansion pot until there is no air in the throttle outlet pipe. Under normal circumstances, 6 liters of water can exhaust the air.