What is the maintenance of Toyota Highlander100000 km?

Highlander100000 km maintenance project:

1. Replace the oil, oil filter, fuel filter and air filter;

2. Check whether the brake system leaks oil and whether the brake pads are within the specified thickness;

3, check the engine belt wear, adjust the belt tension when necessary;

4. Check the transmission, transmission shaft and universal joint sheath for oil leakage and damage;

5. Check the tire tread depth, tire pressure and tire wear, and conduct four-wheel alignment if necessary;

6. Check whether the throttle valve and idle valve are too dirty and clean them if necessary;

7. Check the condition of the spark plug, replace it if necessary, clean the fuel nozzle, and do not disassemble it;

8. Check the status of steering assist, braking system and automatic transmission;

9. Check whether the braking force, speed change and steering are normal;

10. Replace fuel filter (integrated with oil pump) and shock absorber;

Extended data

Matters needing attention in Toyota Highlander's first insurance:

1, to remove the iron filings produced during the running-in period; During the running-in period of Highlander, some foreign objects will be produced, and iron filings are one of them, which will lead to the difficulty in starting the car and the lack of fuel.

2. Check carefully; When Highlander carries out the first insurance, it is necessary to check the nuts of all parts of the whole car, and tighten them immediately once they are loose;

3. Add lubricating oil to the joints such as the hinges of the front and rear doors of Highlander, add coolant to the engine, and check the brake fluid and battery;

It is worth noting that Toyota manufacturers will provide car owners with a free inspection for driving 5000 kilometers or 3 months. This time, it is only for the overall condition check of the new car after driving. Under normal circumstances, oil, water and parts will not be replaced.