How does Toyota Reiz match the throttle?

The following is the specific method for Toyota Reiz to match the throttle: 1. Turn off the ignition switch and wait at least 10 seconds. Loosen the accelerator pedal completely, turn the ignition switch to the on position, and wait for 3 seconds. 2. Quickly repeat the following operations for 5 times within 5 seconds, completely press the accelerator pedal and completely release the accelerator pedal. 3. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up. 4. Fully release the accelerator pedal within 3 seconds after the 4.MIL light is turned on. Start the engine and let it idle for a period of time. Idle for more than 20 seconds, and let the engine run at high speed for two or three times to ensure that the idling speed and ignition timing meet the requirements.