Haval h6 throttle matching method Haval h6 throttle initialization

Haval h6 throttle matching requires a dedicated or universal decoder. According to the prompt of the decoder, clear the original data and identify the new data. It is recommended that the owner send his car to a shop with professional equipment to clean the throttle. After cleaning, the repair shop will help you match it.

Throttle matching is to write the actual throttle data into the computer board, which is called throttle matching. In order to make the engine better adjust the idle speed, control the fuel injection and adjust the shift point, the computer needs the throttle to input the state data in real time. When the data changes, the computer will automatically adjust the throttle data value. If it exceeds a certain value, the engine will work abnormally. At this time, it is necessary to clean the throttle, write the latest state data of the throttle into the computer board, and let the computer board adjust the working mode according to the new data.

Manual matching of Haval h6 valve is not difficult. Open the second gear of the key, that is, the gear indicated by the instrument is fully lit. Then, wait for 20 seconds, press the accelerator to the bottom, hold it for about 10 second, release the accelerator, turn off the ignition switch, pull out the key, and the initialization is complete.