What should I do if Shuaikang wall-hung boiler fails to ignite?

Shuaikang wall-hung boiler is an efficient and energy-saving domestic hot water heating equipment, but sometimes there will be ignition failure. Below, let's learn some ways to deal with the ignition failure of Shuaikang wall-hung boiler:

1. Check the ignition electrode: If the ignition of the wall-hung boiler is abnormal, it may be caused by the failure of the ignition electrode. You can check whether the ignition electrode is dirty, damaged or loose. If there is any problem, please clean or replace it.

2. Check the flame sensing electrode: If the wall-hung boiler is ignited normally but cannot burn, it is necessary to check whether the flame sensing electrode is normal. You can check whether the electrode is dirty or burnt, and clean it with a small brush and other cleaning tools.

3. Check the throttle valve: the throttle valve is an important part to adjust the gas quantity after the ignition of Shuaikang wall-hung boiler. If the throttle fails, the ignition will fail. You can first check whether the valve is open and adjust whether the valve is straight.

To sum up, if you encounter the ignition failure of Shuaikang wall-hung boiler, you can first check whether the electrodes, valves and other components are normal and carry out maintenance. If the problem still cannot be solved, you can contact professional maintenance personnel for handling. At the same time, we also need to pay attention to the correct use of wall-hung boilers to avoid some unnecessary failures.