How to solve the throttle jam?

1. Clean the throttle. Severe carbon deposition on the throttle will cause the throttle to stick. You need to go to the 4s shop to clean the throttle.

2. Replace the throttle. Check the throttle for wear. If the throttle valve is damaged, it needs to be replaced with a new one.

3. Replace the position sensor. Throttle jam may be due to the wear of the internal contact of the throttle position sensor, so it is necessary to replace the throttle position sensor. If the throttle position sensor is integrated with the throttle, the throttle assembly needs to be replaced.

4. Loosen the screw. If the throttle opening screw is tightened too tightly, the throttle will get stuck. The screw of the throttle opening must be loosened with a screwdriver.

5. Add engine oil. Throttle blockage may be due to insufficient lubrication of internal parts, so it is necessary to add some oil to throttle spring and internal parts.

If the throttle fails, you need to check it with a diagnostic instrument and observe the data flow. If the throttle is found to be wide open, it needs to be cleaned.

If the throttle valve fails permanently, cleaning cannot solve the problem, and a new throttle valve needs to be replaced.

Drivers should choose good quality oil, and poor quality oil is easy to form carbon deposit and block the throttle. Million car purchase subsidy