How to clean the modern throttle valve and how to clean the throttle valve?

The modern acceptable way to clean the throttle valve is to remove it, and clean it without removing it. Disassembly is easy to understand, that is, the throttle assembly is removed, and the pollutants inside the throttle are cleaned by technicians with special cleaning agents, and then installed and restored. Cleaning method of modern qualified throttle valve: 1. After removing the air and gas pipeline on the throttle, we can remove the whole throttle. Generally, the throttle is fixed on the engine block with four bolts, and we can quickly remove it with suitable tools. 2. The side of the throttle near the combustion chamber is generally dirty, and black carbon deposition is the main part we need to clean. Cleaning the throttle is mainly to remove carbon deposits on it. We can use special throttling cleaning liquid or detergent. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposit, and its composition is harmful to human body. It is best to wear gloves and masks when cleaning. 3. Spray the cleaning agent to the position with more carbon deposits on the accelerator, and wait for about 5- 10 minutes to dissolve the carbon deposits. Brushes can speed up the removal of carbon deposits. When we see that the stain on the accelerator has completely dissolved, we can wipe the detergent inside the accelerator with a clean towel. Clean the back of the throttle valve so that it has no carbon deposits. 5. Install the cleaned throttle valve on the machine body according to its original position. Then install all the air and gas pipelines to complete the whole process of cleaning the throttle valve. After all the hardware is installed, we need to initialize throttle.