What is this indicator light on the Audi dashboard?

Audi A6 dashboard brake taillight alarm indicates that a brake light bulb of the taillight is broken. Taillight is a double filament lamp, one filament is used for brake light and the other filament is used for night light. Headlights on and taillights off: 1, taillights are a little burnt out. 2. Line problem. The foot brake is on, but the hand brake is not: about the switch of the hand brake light, see if there is any poor contact or disconnection.

1. If the indicator light is on, there is something wrong with the engine control system.

Please slow down and drive to Audi service station immediately, so that people can troubleshoot.

EPC = electronic power control (full name of engine electronic stability system), which is also called electronic throttle by many people.

Audi a6l exhaust gas monitoring system indicator light

1. If the indicator light is on or flashing, it indicates that there is a fault that deteriorates the exhaust gas quality and may damage the exhaust gas catalytic purifier.

Please reduce the speed immediately and drive to Audi service station to troubleshoot.

Audi a6l front seat belt has no indicator light. If the seat belt is not fastened, the indicator light will remain on until the driver's and co-driver's seat belts are fastened. When it reaches a certain speed, it will also send out an audible alarm signal.

Skills of using cruise control system;

1, not used in bad weather

In case of bad weather, such as ice, snow, rain and fog, we should put an end to the use of cruise control system, because in these weather conditions, we can't grasp the road conditions well, vehicles are easy to slip, or we can't see clearly whether there are obstacles ahead.

2. Curves and places with many uphill and downhill are not needed.

In cities, it is also forbidden to cruise at a fixed speed by car in places with many cars, many bends and many uphill and downhill slopes. Because these are special sections, drivers need to change their arrival speed according to the road conditions.

Step 3 set a similar speed

Don't set a speed that is quite different from the current speed when the cruise starts, in case of rear-end collision.