Carol, how to adjust the idle speed of the warm air?

Pacific Auto Network adjusts the heating mode, and the heating temperature is 22℃ (that is, the red area). Adjust the wind direction of the air outlet to avoid fatigue caused by direct blowing on the face and affecting driving safety. Generally, it is advisable to blow your legs and feet. When the legs and feet are warm, the whole body is warm. If the idle speed is too high, it may be necessary to clean the throttle.

Use of Toyota Corolla Warm Air: If you need to blow glass, it is recommended to use defogging mode. When using warm air, it is not advisable to turn on the warm air immediately after starting, wait for about 3-5 minutes, and then turn on the warm air when the water temperature rises to normal temperature, that is, when the water temperature rises to the middle. There is no need to turn on the air conditioner (that is, the AC switch), because the warm air is generated by the thermal cycle of the car itself, so that oil will not be wasted.

Setting the circulation mode of the air conditioner to the internal circulation mode is helpful for the indoor temperature to rise rapidly, and then switching the external circulation as needed is helpful for the indoor air circulation. When the engine is working, incomplete fuel combustion will produce high concentration of carbon monoxide. When the car stops, the heating continues to be turned on, and the windows are closed, the concentration of carbon monoxide emitted by the engine will increase gradually, so try to avoid stopping and turning on the heating.

Then, adjust the warm air mode, the warm air temperature is 22℃ (that is, the red area), and adjust the wind direction of the air outlet to avoid fatigue caused by direct blowing on the face and affecting driving safety. Generally speaking, it is advisable to blow your legs and feet. When your legs and feet are warm, your whole body will be warm.