Method for adding lubricating oil to idle motor

Where can I refuel the idle motor? Generally, the idle motor can't be lubricated, and it will be replaced directly after a fault occurs. If riders want to add grease to the idle motor, they need to disassemble the idle motor, and then grease the bearings and rotors. All car engines use electronic throttles. Compared with cable throttle, electronic throttle can control the amount of air entering the engine cylinder more accurately. When we step on the accelerator pedal, we actually control the accelerator opening, not directly control the fuel injection. When the sensor detects that the throttle opening becomes larger and more air enters the combustion chamber, the electronic control unit will instruct the fuel injection system to increase the fuel injection quantity. Therefore, the throttle valve is equivalent to the throat of the engine. Using the back of the accelerator for a long time will produce carbon deposit. Excessive carbon deposition may lead to unstable idle speed of the engine, and cyclists need to remove the throttle to clean it. Cleaning the throttle is very simple. It needs to be matched again after cleaning and installation, otherwise the fuel consumption will increase in a short time. Engine ecu has strong self-learning ability. When carbon deposition on the throttle is detected, another set of control logic will be used to control the throttle. When the carbon deposit on the throttle is removed and put back, ecu is still using the control logic of carbon deposit on the throttle to control the throttle without carbon deposit, so the fuel consumption of the car will rise in a short time, but it will return to normal level after running for a few days. Million car purchase subsidy