Where is the Camry sensor?

The temperature sensor is located near the front fog lamp. The main sensor positions of Camry are as follows: 1. Oxygen sensor: installed on the exhaust pipe, it is used to monitor the burnt gas and judge whether the engine is fully burned and whether the mixing degree is too thin or too rich. 2. Wheel speed sensor: used to collect the rotating speed of the car to judge whether the car is slipping. Usually installed on the hub of each wheel. Once the sensor is damaged, ABS will fail. 3. Water temperature sensor: it is installed next to the temperature controller and converts the temperature of cooling water into an electrical signal. Increase the fuel injection or ignition advance angle at low temperature, prevent explosion at high temperature and delay the ignition advance angle. 4. Intake pressure sensor: generally installed on the throttle. With the different engine speed and load, a series of resistance and pressure changes are induced and converted into voltage signals for ECU to correct fuel injection quantity and ignition timing angle. Camry camshaft signal wheels are mostly installed at the front end of camshaft.