Tiguan throttle matching method, Tiguan throttle disassembly tutorial

After long-term use of Volkswagen Tiguan, dirt such as carbon deposit and sludge will appear on the throttle, which will affect the opening and closing of the throttle. At this time, the accelerator should be removed for cleaning. After cleaning, the correct throttle matching method should be used for data matching to make the throttle work normally.

Observe the disassembly and assembly procedures of the throttle valve.

1. First, remove the pipe connecting the air filter on the throttle.

2. Find the plug of the air temperature sensor and the plug of the throttle position sensor on the throttle and remove them.

3. Remove the water pipe from the throttle valve, and be careful not to let the sensor connector get wet by water.

Generally, the throttle is fixed on the intake manifold with four screws, and you only need to loosen it with tools. Pay attention to catch it by hand when it is almost finished, so as not to fall into the engine compartment.

5. At this time, the throttle can be completely removed. During this process, be careful not to let sundries fall into the intake manifold.

6. During installation, install them in the reverse order.

When we clean the throttle, after removing impurities such as carbon deposit and oil stain, the throttle opening returns to its original position, and the computer records the position before cleaning, so the computer can't update the data in a short time, resulting in the mismatch of throttle opening. At this time, manual matching is needed.

View throttle matching method

1. Start the car and connect the car's scan tool to the car through the OBD interface.

2. After the communication between the car and the diagnostic instrument is successful, select the vehicle type through the menu, find the engine item, and click Enter.

3. after entering, find the items related to thro tt music, find the items that match thro, and then click.

4. After entering, click the throttle matching item and follow the prompts.

5. The throttle valve works adaptively to complete the throttle valve matching.

@20 19