How to use the air cushion bed How to use the air cushion bed

1. Lay the air cushion flat on the bed with the side with the tubular air cushion facing upward. When laying an air cushion bed, the air inlet should be placed at the foot end of the patient. Connect the two inflatable conduits on the air cushion with the air pump jack respectively.

2. Turn on the power supply, turn on the power switch and adjust the knob to control the inflation pressure. When preparing for inflation, the air cushion bed should be paved, and it can be used normally after inflation. Generally, the first inflation time is about 30 minutes. Turn the knob of the air pump to the maximum for quick inflation.

3. When putting the bedsore-preventing air cushion bed on the bed, it is best to spread a mattress on the bed board, and then spread a mattress to avoid being worn out by the hard bed body.

4. Independent airbags are ventilated in turn, and the gas pressure at the compressed part is changed through odd-even fluctuation.

5, a single airbag can be disassembled, which is convenient for cleaning and disinfecting air mattress.

6. The air cushion at the toilet seat can be disassembled, thus avoiding the trouble of moving the mattress.