It is not recommended to remove the sagitar throttle for cleaning.

The electronically controlled throttle cannot be removed for washing, and everything else can be removed for washing.

Cleaning method:

1. First, if there is a plastic heat shield on the engine, it needs to be removed first. Remove the engine cover, and the throttle can be seen under normal conditions. There are some air pipes around the throttle, which need to be removed, and the position of each pipe should be clearly recorded.

2. After removing the air pipeline on the throttle, we can remove the whole throttle. The throttle of Tiida is fixed on the engine block with four bolts, which can be quickly disassembled with suitable tools. The side of the throttle near the combustion chamber is generally dirty, and the black carbon deposit mark is the main part that needs cleaning.

3. Cleaning the throttle is mainly to remove carbon deposits on it, and special throttle cleaning liquid or cleaner can be used. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposit, and its composition is harmful to human body. When cleaning, it is best to wear gloves and masks, spray the cleaning agent to the position with more carbon deposits on the accelerator, and wait for it to dissolve the carbon deposits for about 5- 10 minutes. Using brushes can speed up the removal of carbon deposits.

4. When you see that the stain on the throttle has completely dissolved, you can clean the detergent inside the throttle with a clean towel, install the cleaned throttle on the engine block according to the original position, and then install all the air pipes, thus completing the whole process of cleaning the throttle. After all the hardware is installed, throttle needs to be initialized.