How to clean the throttle of Santana 3000?

Method? Punch a hole in the vacuum tube with a needle, and let the cleaning liquid drip into the air inlet through the needle and clean it. You can use the vacuum tube (red circle in the figure) of the air inlet valve of the air conditioner, unplug the tube and insert the needle.

Be careful not to remove the protective white plastic tube covering the needle, it is only closely combined with the vacuum tube. Then start the car, adjust the flow to the maximum, and stabilize the engine speed at around 1500.

About 30 minutes, water droplets began to appear in the exhaust pipe. The cleaning was completed and the expected purpose was achieved.

How to match x43 1 with Santana 3000 after cleaning the throttle?

Use a decoder for matching.

1, input engine control unit 01;

2. Query the trouble-free record and enter the basic setting function 04; 3. Enter the set channel number 060. Press the confirm button, and the last set of numbers will display ok or normal and results.