The notebook is turned on in the traditional mode, but not turned on.

The laptop can't be turned on, which is a problem that many people will encounter. However, don't worry, we can check the problem step by step and find a solution.

Power supply problem

If the notebook has no power response at all, check the power supply, poor contact or hardware problems first. This may be the first step to solve the problem.

Operating system or software problems

If the power supply is ok, but the notebook still won't start, there may be something wrong with the operating system or software. At this time, you need to consider entering the second step of investigation.

Power plug problem

Check whether the power supply is plugged in or whether there is something wrong with the plug. If you are using the battery, try plugging it in and try again. If someone else's power supply can still start the notebook normally, it is a power problem. Otherwise, it may be a hardware problem. Go to the fifth step for troubleshooting.

Advanced options page

If there is no problem above, you can try to enter the advanced options page and select "Last Correct Configuration" to start the computer. If you find problems after entering the system, it may be caused by virus infection, incompatibility between hardware drivers and the system, etc. At this time, run anti-virus software to kill viruses, and try to delete drivers such as graphics cards and network cards. If the problem persists, proceed to the next step.

Hardware problem

If none of the above methods can solve the problem, you may need to consider repairing, installing or reinstalling the system. Set "CD-ROM drive as the first boot device" in BIOS, and then insert the system disk for repair and installation. If the problem still exists, you can choose "one-click gost recovery system" or use the system disk to reinstall the system.

Send it for repair

If none of the above methods can solve the problem, it may be a hardware problem. Open the notebook to see if there is any loose hardware or too much dust. At the same time, check whether the newly replaced hardware is compatible. If the problem still can't be solved, it is recommended to send it for repair and let professionals check the hardware problems one by one.