How to tell whether solid wood furniture is true or false These three tricks can help you to tell whether it is solid wood furniture or fake solid wood.

Many people like to buy solid wood furniture, mainly because of its environmental protection and low formaldehyde content. But because solid wood furniture is invisible to people who don't know how to do it, some unscrupulous merchants pretend to be solid wood furniture with iron sheets. You know, the price of the latter is too different from the real solid wood furniture. If you are cheated, you will lose a lot.

1, to distinguish solid wood furniture, you can look at the pattern of performance first. The grain on the side of the real wood is aligned with the grain of the solid wood in front, but the backrest of the bed below is not aligned, which means it is more likely that it is not solid wood.

2, look at the color difference. Nowadays, many solid wood furniture are rarely made of whole wood, and they are basically spliced, so the color of real solid wood furniture may be different. If the colors are all the same, it is more likely to be stuck or impersonated.

The lines are different and the colors are different, but the lines of the same piece are the same.

3. Look at the internal reality. To judge solid wood, we must look at the actual situation inside. There is little difference between the color inside the solid wood board and the color outside. If it's a cupboard, you can look in the drawer. If the color difference is not big, it is really solid wood.

In addition, the real solid wood furniture, internal lines and external lines are also right. If it can't be right, it means it is false.

There is a trick here, that is, hang it upside down on the ground and you can see it clearly by looking at the seam at the bottom.

At the same time, you can also put down the cabinet to observe and compare the grain and thickness of the table legs. The wood grain of the lower side plate is completely misplaced, and it is definitely not solid wood furniture.

In addition, it is worth noting that generally good quality solid wood furniture will adopt tenon-mortise technology instead of direct drilling. If you drill holes like this, you can further infer that it is not solid wood furniture.

Have you learned all the above methods? Does it work for you? You can express your views in the comments section.