How to adjust the fishing float?

Fish drifting, also known as floating fishing, is a fishing technique. The technical requirements of fishing float are comprehensive, and it has good strain characteristics for fish to float for food and fish to compete for bait. So how to adjust the drift to catch big fish when floating fishing, the specific drift adjustment method will be given below:

1. Find the bottom and position of the drift adjustment.

Before fishing, do a rough bottom search, throw the fishing rod directly into the water without bait, and hang more heavy lead skin on the lead skin seat, mainly to let the float sink, and then observe the floating situation of the fishing line. When the floating body rises to the destination, when the top-level spatial beans and the second-level spatial beans are adjacent, the task of finding the bottom and positioning is completed.

2. Adjust the fisheye for drift adjustment.

After roughly finding the bottom, hang the auxiliary line first, and pull the float down to a position of about 25 cm in the state of empty hook. When adjusting the float, the downward distance of the float is about10cm greater than the length of the long line. Then move the float and observe that the float should be on the water. Keep pulling up. If you see scattered eyes, you have found the bottom accurately. Finally, the bottom is reversed.

3. Adjust the float when trying to fish.

You can try fishing after adjustment. If the position of the line changes during fishing, and there is no fish biting for half an hour to an hour, don't wait any longer. Immediately pull up the float and replace the hook with a water layer. Sometimes the water layer where fish gather may change. At this time, it is necessary to adjust the position in time according to the actual situation, so as to catch fish.