Traditional Culture Encyclopedia - Traditional culture - How can I make my TV set (old TV set) at home able to see internet TV, I have 4M telecom bandwidth at home. Do I need to buy any equipment?

How can I make my TV set (old TV set) at home able to see internet TV, I have 4M telecom bandwidth at home. Do I need to buy any equipment?

You need an Internet set-top box. You also need different video cables according to the video input interface of your TV (old TV). There are two common types, HDMI and AV cables, which you can look out for when picking an internet set-top box.

The TV connects to the network TV set-top box, the connection methods are as follows:

1, network set-top box, usually will have HDMI interface. HDMI cable contains the function of transmitting audio, it is more convenient to use. Plug one end of the HDMI cable into this set-top box interface.

2, the TV video source interface if there is an HDMI interface, usually more than one HDMI interface, the other end of the HDMI cable into any HDMI interface, the TV and digital TV set-top box connected to the power supply can be. The video signal played using the remote control to switch.

3, the TV if older, the video source for the AV interface, you need to prepare a tow three AV cable.

4, one tow three AV cable black single head, inserted into the set-top box "AV" interface.

5, the AV interface of the TV video source, in accordance with the corresponding color, connected to the remaining three interfaces of the one tow three AV cable, the TV and the network set-top box can be connected to the power supply. Play the same video signal using the remote control to switch.

6, the TV connected to the network set-top box is completed, the network cable into the network TV set-top box.

7. In the TV setup, after selecting the corresponding video source, the network set-top box interface appears. Use the remote control to operate the set-top box and open the "System Settings".

8. In System Settings, select "Network Settings" and "Cable Settings".

9. In Cable Settings, select "Cable: Obtain IP Automatically", and the network set-top box will detect the network signal and obtain an IP address. At this point, the TV has been successfully connected to the network.