Tile seam construction process!

There are two kinds of seam construction: one is 満填型, and the other is half-fill type.

Construction process

Playing the line to find the rules (open seam, fill the gap), doors and windows around the plugging, wall watering, hooking, cleaning the walls and floors, looking for leaks, clean up the walls and floors.

Construction process

Brick seams: can be caulked or not, such as caulking need to wait for the caulking material to dry safely, before the professional construction of the seam sealant, the seam depth of at least 3 millimeters.

Cleaning treatment: the use of seam sealant should be the first to use a vacuum cleaner to vacuum the dust in the tile seams, tile seams on both sides of the towel to wipe clean, to remove dust, grease and other pollutants, and at the same time, use a cleaning shovel to remove pollutants on the surface of the ceramic tile.

Stick the patterned paper: If the tiles are antique tiles or hemp surface tiles, before the seam to paste the patterned paper, the surface turn can not be posted. Tile surface and seams should be kept clean and dry when pasting the patterned paper. The patterned paper to post on both sides of the seam, in order to ensure the effect of the cross, horizontal and vertical line construction is recommended to be separated by 24 hours. The two sides of the paper should be cut neatly without burrs, the width is not less than two centimeters, the adhesive force should be good but the glue does not remain.

Loading the gun to play seam: choose the color of the seamstress, loaded with a special plastic tube, set of special high-quality labor-saving glue gun, squeeze to remove the front end of the 30g seamstress, so that the seamstress is fully mixed evenly can be. When playing seam mixing tube as perpendicular as possible with the tile surface so that the seam sealant can fill the gap, forward evenly, master the strength and frequency, so that the seam sealant evenly outflow. Suitable temperature 5-38 degrees.

Pressing and scraping seams: If you want to make the surface of the cured seam sealant has a moderate arc per can, the special ball can be used to press the seam sealant from one end of the force along the brick seam to the other end, the force to maintain uniformity: If you want to make the performance of the cured seam sealant and the tile surface as far as possible on a horizontal surface, you can use a seam scraper or soft plastic plate from one end of the force along the brick seam to pull to the other side, to maintain uniformity of force, and not deviate from the Masonite to prevent contamination of the tile surface.

Cleaning and organizing: If you use the paper process, let it sit for 5-10 minutes, tear off the paper, remove the surrounding seam sealer, and wipe off the remaining stains. Such as the use of the process of not sticking the paper, to wait until about 3 hours after the remaining seam, with a cleaning spatula to clean up the surface of the tile semi-cured seam sealer.

7. Finished product protection: room temperature below 25 degrees, 3 hours table dry, 24 hours to use the strength, natural maintenance 7 days. Seam within 24 hours to avoid pollution, rain, water, avoid walking on the ground.