How to disassemble the bathroom ceiling aluminum buckle plate

Bathroom ceiling aluminum disassembly methods are as follows:

1, bathroom, if the use of aluminum thick plate as a ceiling material, want to dismantle, first from one of the pieces of the disassembly, it is best to prepare a suction cup, will be affixed to the sucker corner of the aluminum buckle plate, and then force down a pull. One of the corners will be up, and can be disassembled successfully with the buckle plate as a whole.

2, if there is no suction cup, you can through the wire or cutter, inserted into the gap in the buckle plate, and then slowly pry down, first of all, one of the piece of pry open, and then slowly dismantle the other buckle plate. If you use a suction cup, it will be more trouble-free and easy.

3, next reinstallation. Before installation, you need to combine the design of the drawings, measure the area, including the height of the installation. Through the ink cartridge popping out the level line, the wires and so on to do a good job of pre-buried work. Hang a good light steel keel, through the buckle into the triangular keel, and then the aluminum buckle plate pressed into the gap in the triangular keel.