Personalized Crystal Image Polishing Technology for Crystal Digital Images

1, specific production equipment: crystal grinder+crystal curing machine+computer+printer.

2. Scope of application: Only regular crystal wafers can be polished.

3, making crystal technology:

Made of fully transparent crystal film or translucent film, the image is placed between the bottom of the crystal and the glass sheet, then the light is fixed by crystal glue, and finally the edge is trimmed and polished by a crystal grinder, and then shaped.

4. Production method: printing+crystal sizing+solidified crystal film+solidified sheet+crystal covering+re-solidification+grinding and polishing.

5. Time, quality and shortcomings:

Time: It takes about 40 minutes or more, and it may be longer if you are not skilled.

Advantages: (1) can be permanently waterproof and can resist sharp scratches.

(2) The stereoscopic impression is better than that of unpolished products;

(3) Better anti-fading ability (the image is isolated from the air)

Disadvantages: (1) The production time is long, and there is much noise and dust during grinding, which has an impact on the health of the producer, especially on the lungs;

(2) The grinder needs a special operation room, which consumes a lot of electricity;

(3) Once the curing process or polishing process goes wrong, the product is scrapped and the loss rate is high;

(4) A piece of glass is stuck behind, and the finished product will affect the overall crystal quality;

(5) Due to cost and environmental reasons, terminals are difficult to popularize.