Sunken bathroom practices, sunken bathroom construction steps is what

1, first of all need to paint waterproof material, generally speaking, on the ground and the wall should be brushed together, and the height of the waterproof under normal circumstances can not be less than 30 centimeters.

2, next to use the brick wall as a partition processing, making the bathroom into a number of compartments. Then we have to fill the ceramic particles for backfill, choose moisture-proof ceramic particles filled into the grid, pay attention to the pressure between the can not be too tight, otherwise it will not play a role in absorbing water vapor.

3, then we need to arrange the rebar, in the lattice above the arrangement of the square reinforcing network, in order to ensure the firmness, and then finally pour the concrete layer, to do a little leveling with concrete, but also to brush on the waterproofing paint, and finally lay tiles on the completion of the sunken bathroom.

What are the construction steps for a sunken bathroom?

1, first of all, the wall and floor waterproofing twice, the waterproofing of the wall should be more than 30 centimeters above the caisson.

2, the downpipe arrangement and then use bricks to build 4040 centimeters of overhead lattice, and then fill the lattice with ceramic granules.

3, in the lattice on the arrangement of the rebar after pouring concrete, leveling and then do a waterproof so that is completed.

Advantages of the sunken bathroom

1, if the bathroom floor leakage, the water will flow directly into the sunken space, because there is a secondary drainage, so do not have to worry about water in the bathroom.

2, sunken bathroom will be lower than the other bathroom 40 centimeters, so in the cloth water pipe can be directly in their own ground construction, do not have to affect the owners downstairs, the water pipe will not be exposed to the outside to affect the aesthetic, and sunken bathroom drainage noise is very small.

Disadvantages of the sunken bathroom

1, waterproofing requirements are high, and the costs incurred are high.

2, if but leakage occurs then the repair is very complicated, you must knock out the entire floor and then re-build the plumbing and waterproofing.

3, the middle of the backfill objects will sink over time, the cement layer above and the floor tiles will be with the cracks, the water will flow into the ground, the water will be more over time.

What do I need to pay attention to in bathroom design?

1, to do a good job of waterproofing requirements, which is very important. If the waterproof is not in place, the later will be in the wall or the ground leakage trouble, and many water pipes are used to hide the settings, the later maintenance will be very difficult.

2, to do a good job of space, the design of the bathroom must consider the size of the space, if there is no problem with the space, relatively large, we need to wet and dry separation of the washbasin and the shower area, the later use of the time will find that there will be a great deal of benefit.

3, consider the ventilation and lighting effect of the bathroom, because the bathroom is more humid, if you can not achieve the purpose of through the points, the later will find that the bathroom will produce odor, and long-term wet, resulting in bacterial growth.