How to cut tiles

1, locate, move the ruler to select the required cutting size, and hold the handle by hand to pull the cutter wheel to the back seat.

2. Scribing: Push the handle forward slightly to make the cutter wheel draw a continuous and symmetrical straight line on the brick surface.

3. press. Press the handle with proper force, and the brick will break along the score line, so that the tile will be cut.

Matters needing attention in cutting ceramic tiles

1, if the hardness of ceramic tile can not meet the requirements, it is easy to have uneven and unsmooth problems when cutting.

2, to master the angle when cutting, you can use a fully functional ceramic tile cutting machine, which can not only cut 90 degrees, but also cut 45 degrees.

3. When cutting, you must draw a good line, which is crisp and neat. It is recommended to find a professional to cut it.

4. Whether the marking is uniform, continuous and clear from beginning to end, and whether the tiles can be cut well. The cutter wheel is made of special superhard alloy, and its hardness exceeds the surface of ceramic tile. Generally, as long as you hold the handle with little force and push the cutter wheel gently and smoothly, you can draw a cutting line on the surface of the tile.

5. In the process of cutting ceramic tiles, excessive scribing will make the cutting line tortuous, and may also cause the superhard alloy yellow blade of the cutter wheel to collapse, greatly shortening the normal service life of the cutter wheel.