What is the best board for homemade furniture

1, solid wood board

Solid wood board is made from the whole piece of wood, this kind of board is strong and durable, maintain the original wood grain, is the best choice of furniture board. But the price of solid wood board is still relatively high, the construction process requirements are also very good, so the use in the decoration is relatively small.

2, plywood

Plywood is also known as plywood, can also be called fine core board. This is made of three or more layers of one-millimeter-thick plate glued and hot-pressed. It is by far the most commonly used material for handmade furniture.

3, decorative panels

Decorative panels are solid wood panels precision planing into a thickness of 0.2mm or so thin veneer, plywood as a substrate, after the gluing process made of decorative panels with a single-sided decorative effect. It is a special way of plywood existence, the thickness of 3 centimeter. Decorative panels are currently different from the practice of mixing oil a high-level decoration materials.

4, Blockboard

Blockboard, commonly known in the industry as large core board. Large core board is made of two pieces of veneer in the middle of adhesive pressure splicing board and become. The price of large-core board is cheaper than fine-core board, its vertical (to distinguish between the core material towards) poor bending strength, but the horizontal bending strength is higher.

5, density board

Fiberboard, also known as density board, is made of wood fibers or other vegetative fibers as raw materials, applying urea-formaldehyde resins or other applicable adhesives made of man-made boards. Adhesives and/or additives can be applied during the manufacturing process. Fiberboard has the advantages of uniform material, small longitudinal and transverse strength difference, not easy to crack, etc., and is widely used.

6, fire prevention board

Fire prevention board is the use of siliceous or calcareous materials as the main raw material, with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed, made of decorative panels by autoclave technology. It is a new type of material that is being used more and more, and other uses are not only for fire prevention. The construction of fire prevention board for pasting glue requirements are higher, better quality fire prevention board price than decorative panels are also expensive.

7, gypsum board

is made of cooked gypsum as the main raw material mixed with additives and fibers, lightweight, heat insulation, acoustic, non-combustible and sawn performance. Gypsum board and light steel keel (pressed by the thin steel plating) combined, will constitute the light steel keel gypsum board ceiling. There are many types of gypsum board, including paper-faced gypsum board and hollow gypsum board, with various specifications on the market. At present, the use of light steel keel gypsum board ceiling as a partition wall of the more, used to do modeling ceiling is relatively small.

I hope it can help you.