Classification and selection of absorbent mops

There are more and more kinds of household cleaning products, and people are always at a loss when choosing. Take the mop as an example, it is one of the indispensable and important "weapons" for our cleaning, and there are also many designs. Faced with all kinds of mops on the market, which one should I choose? Which is the best cost performance? Features: The cleaning head of mop adopts PVA (polyvinyl alcohol) collodion, which has super water absorption capacity, ten times that of ordinary sponge, and is easy to operate. When cleaning, just soak the collodion in water and gently pull the pull rod a few times to discharge the sewage. After being placed, the glue head can naturally dry and harden to prevent the growth of bacteria. This mop can not only clean the floor, but also clean the walls and ceilings.

Price: 30 yuan to 100 yuan, change the head 15 yuan to 30 yuan.

Trial experience: put the rubber head into the bucket to absorb water quickly, and gently pull the lever to squeeze out the water easily. The overall feeling is that it is easier to make the floor clean during the wiping process, even for large and hard mud marks, it can be removed after wiping several times. Mops are also easy to clean. It should be noted that if the tile floor is rubbed hard, the water should not be squeezed too dry, otherwise it will not be pushed.

After cleaning, put the mop in a ventilated place. After the water evaporates, the rubber head becomes hard and has no peculiar smell.

In addition, because the glue head can squeeze out 80%-90% moisture, it can not only be used to clean the laminate floor, but also quickly absorb a lot of water and soup spilled on the floor carelessly.

Disadvantages: weak wool absorption ability, not suitable for wiping grease and chemical dirt. In addition, the cleaning ability of corners is also poor, and dirty water is easy to squeeze out after collision.

Suggestion: Be sure to choose a good quality rubber mop. Poor quality rubber joint is easy to crack, poor water absorption and short service life. Features: This machine uses wired power supply, which is beyond the scope of traditional mops. It has three brush heads that can rotate at high speed at the bottom, and stubborn stains can be effectively removed with detergent. Moreover, the machine can also have the functions of vacuuming, waxing and polishing.

Price: 500 yuan-1000 yuan.

Test feeling: After the machine is turned on, the brush of the machine immediately starts to rotate, which feels like scrubbing the ground with a brush. After that, you can use the cleaning cloth provided by the original machine to wipe off the dirt, but the effect is not ideal, because the cleaning cloth is small, and you have to wipe a small area, otherwise you will leave a slight "black circle" on the ground. If you use a semi-dry cloth mop, the cleaning effect is very obvious. As far as cleaning function is concerned, this machine is more suitable for cleaning large areas and dirty hard floors, but it is a bit troublesome to use.

Disadvantages: loud noise and shallow traces on the floor after cleaning.

Suggestion: If ordinary families just want to clean, it is a bit wasteful. Features: This kind of mop is very popular in recent two years. Mop head subverts the traditional round head and adopts a flat design, so that the floor and the ground are fully stressed. The mop is made of fine cotton yarn and superfine fiber, which is convenient to wipe off the dust between gaps and corners. At present, many products are also equipped with card towels, which can be easily installed to wipe the floor with all kinds of waste towels, and special towels can also be installed to clean the glass and windows.

Price: 40 yuan to 200 yuan

Experience: This kind of mop is light, while the metal one is slightly heavier. The telescopic rod of mop is locked with taper thread to ensure that the length of mop can be adjusted at will. Because of the flat design, you can go deep into the original clean corners such as sofas and furniture gaps. The cotton mop is difficult to clean, and the microfiber cloth is easy to break, so it can't wipe the hard surface. Although the whole loading and unloading process is convenient and fast, it needs to be taken, placed and replaced manually. When drying, cotton mop cloth and superfine fiber cloth can be directly removed from the mop and separated, and the former is more difficult to dry.

Disadvantages: you need to touch the mop by hand, which is not suitable for cleaning tile floors.

Suggestion: Make full use of the waste towels and rags at home, which can also play a polishing role. Features: low price, mop poles are divided into plastic poles, wooden poles and metal poles. Mop head is mostly made of absorbent cotton strips and cotton thread. The cleaning power of this mop is ok, but it is more troublesome to clean, and some strips do not absorb water.

Price: 5 yuan to 40 yuan

Experience: The most traditional cotton mops are generally made of wood, and the price is the cheapest. But it is very heavy to use, and it is difficult to wring out the water. Although the cleaning power is ok when cleaning the floor, there are many water marks left on the ground, which is not easy to dry. Sometimes, in the process of cleaning the floor, the cloth strips will fall off.

The yarn mop is better than cloth mop, but cleaning is really a problem. White yarn can easily become "Cinderella".

Disadvantages: Cotton mop head is not easy to dry, and it is easy to stink and breed bacteria. Besides, "hair loss" is the biggest problem. After a period of time, the mop will be "sparse on the top of the head".

Suggestion: Pay attention to whether the binding is tight and whether the cloth strips will fall off. Features: At present, some manufacturers have improved the cotton handle, using fiber cloth that is easy to absorb water, and equipped with a bucket and wringer, which makes the operation of the mop much more convenient. This mop is light in weight, small and exquisite, convenient to use, effortless and relatively efficient in mopping the floor.

Price: 20 yuan to 40 yuan, replacement head 10 to 20 yuan.

Experience: This kind of mop generally uses plastic pipes, which makes it feel much lighter. Fill the bucket with water, put it on the wringer, press it hard, and the water will come out, which is drier than wringing by hand. When cleaning the floor, the steering is more flexible and angular. However, because the fiber cloth is relatively light, it has to be rubbed several times to deal with stubborn stains. With the wringer, the mop is easy to clean and dry, with less smell.

Disadvantages: The volume of mop head will become smaller after being wrung out, and it will become smaller as it is used. If the room is big, it will be difficult.

Suggestion: MOPs made of high-quality fiber cloth are not easy to fall off and have long service life. Match the bucket with the wringer.

Absorbent mop-what should I do if the absorbent mop stinks?

Mop head can be cleaned with a small amount of detergent or washing powder. If it is dirty, you can soak it in warm water of about 50 degrees and then scrub it with a shoe brush. The water temperature should not be too high, just warm water. Excessive temperature will affect the mop's mopping effect. Be sure to clean it with clear water after washing, and then squeeze the water dry. So mop head doesn't smell that big. Pay attention when using it in the future. Wash it with clear water and squeeze it dry every time you use it. You can get a hook on the bathroom wall and hang the mop on it after use, so you don't have to put it on the floor all the time. There is usually a lot of water in the bathroom. A mop soaked in water for a long time will definitely smell. Also, although mop head can't dry for a long time, it doesn't matter to dry occasionally, and there is no need to keep the humidity for a long time. It can be completely dried at home.