Wooden Bed Installation Video Tutorial

1 First of all, all the parts are classified for easy reference. If it is found that each part is not enough, it is also convenient to inform the seller to reissue it in time.

2 Assemble the head and tail of the bed. According to the pattern in the manual, this step is simple and clear. Stand against the wall after spelling.

3 Fasten the buckles on the two horizontal beams at the head of the bed and the end of the bed, and tighten them with a screwdriver. I have a1.8m× 2m bed with four pairs.

Next, install the four columns under the bed and tighten them in the middle with a screwdriver. Put it aside for use. To tell the truth, these small pillars are too thin to be of much use.

5. After the turn, it is the bed board. This step should pay attention to the narrow bed board over there, so it should be on it, not upside down.

6 Tighten and fix the frame and girder with your own tools.

7 Place the underframe on the buckle.

8 put on the bed board, put on the mattress and you're done. Special note: carefully observe the schematic diagram of the manual, and don't install it backwards to avoid rework. Choose the right position and put it together again, otherwise it is not convenient to change positions.