What are the installation steps of Chinese hollow partition and how to install it?

hollow partitions always give people a sense of mystery. Nowadays, many families will choose hollow partitions when making partitions, which can effectively partition the space or a landscape in the home! Installation Step 1: Be familiar with the designed drawing route. According to the requirements of the drawing, position the wall to draw lines. The lines should be horizontal and vertical, and the dimensions should be accurate. Wooden mortises should be punched at the top and bottom of the wall, which is mainly used for fixing, to ensure the stability of the wooden partition in the later period. The concave-convex part should be connected by concave-convex method, and the general depth is about 5 mm. It is forbidden to punch wooden mortises in the bathroom or on the roof, and it should be directly punched on the wall to ensure safety. Installation Step 2: For the stabilization of the dragon skeleton, it is generally necessary to add a dragon skeleton to meet the requirements of heavy objects. Before the dragon skeleton is fixed, it is necessary to brush fire-proof and anti-corrosion coatings, one for fire prevention and anti-corrosion, and the other for completely covering the keel; A 3-5mm notch should be left between the gypsum board at the end of the hollow lattice partition and the surrounding wall or column. During construction, the caulking paste should be filled at the notch first, and then the board should be laid, and the caulking paste should be squeezed to make it closely contact with the adjacent surface layer to prevent the later-stage sealing phenomenon. Installation step 3: clean up the construction site in the later stage, and clean up the sundries at the track notches, so that the hollow movable partition in the later stage can run freely, with high utilization rate and high environmental protection coefficient.