What is the installation size standard of wooden door gap?

Now many people choose wooden doors when installing doors. The quality of wooden doors is relatively guaranteed and beautiful. However, the installation of wooden doors will be more troublesome, and there are some problems that need attention, especially the adjustment of the door crack. If the door crack is not properly adjusted, it may affect the opening and closing of the door. What are the skills of adjusting the crack of wooden door? What is the installation size standard of wooden door gap? Now many people choose wooden doors when installing doors. The quality of wooden doors is relatively guaranteed and beautiful. However, the installation of wooden doors will be more troublesome, and there are some problems that need attention, especially the adjustment of the door crack. If the door crack is not properly adjusted, it may affect the opening and closing of the door. So everyone needs to pay more attention to the installation of wooden doors. So, what are the skills for adjusting the door crack of wooden doors? What is the installation size standard of wooden door gap?

Skills of adjusting the gap of wooden door

There is a door seal on the market, which can be installed under the door, and the distance can be easily adjusted, but the door can be opened and closed freely without seeing the gap. If it is a push-pull wooden door, there are sponge strips on the market. Just buy some rice and stick it on it. You can remove the door first, then nail a piece of wood slightly smaller than the crack of the door, and then reinstall the door. You can ask a carpenter to do it.

What is the installation size standard of wooden door gap?

1, crack size standard.

Regarding the number of cracks in the door, there are relevant requirements in the wooden door industry standard. Generally speaking, the gap between the door and the ground must be between 5 and 8 mm, the gap between the left and right sides of the door and the door frame should not exceed 6 mm, and the upper seam of the door should not exceed 2 mm. If the gap is too large, it will not only affect the appearance, but also affect the sound insulation effect, and the air inlet will not keep warm in winter.

2. Sound insulation non-rigid indicator

As for the sound insulation effect of wooden doors, there is no hard index about sound insulation in the current wooden door industry standard, unless it is a special sound insulation door. Generally speaking, consumers can achieve the sound insulation effect required by normal room life as long as they buy qualified wooden door products with medium and high prices and install them in a standardized way. In addition, the sound insulation performance of wooden doors is also related to the material. The higher the material density, the stronger the sound insulation performance. If the dragon skeleton inside the wooden door is loose and the two door panels on the surface are thin, then the sound insulation performance of this wooden door is poor.

3. The installation level is very important.

After all, wooden doors are customized products, and their overall quality is closely related to installation. If improperly installed, it will lead to large cracks in the wooden door, which will have a great impact on the sound insulation effect. When installing the door, first check whether the gap size is in compliance, and then close the door to see if the gap on the door is balanced and whether there is a situation where one side is wide and the other side is narrow. If it is not balanced, it means that the door frame is not straight and affects the appearance. If there is a gap between the door cover line and the wall surface, it is likely that the wall surface is not vertical or uneven in thickness, and it can be sealed with sealant.

Through the introduction of the above article, I believe that everyone should have an understanding of the skills of adjusting cracks in wooden doors and the installation size standards of wooden doors. Although it is not difficult to adjust the crack of the wooden door, it is recommended that the professional master operate it more safely. There is a certain standard for the installation size of the wooden door gap. You must not adjust it as you want, and you must follow the range of 5-8 cm, so that there will be no problems when you use it in the future.