Power saving skills of pure electric vehicle

Power saving skills of pure electric vehicle

Knowledge popularization: driving steps of new energy vehicles, power saving skills of pure electric vehicles

At present, most electric vehicles have four gears, D, N, P and E, in which D is the forward gear and N is the neutral gear, which is generally used when parking and starting. P is the parking gear and E is the energy saving gear. It can automatically recover the energy during braking deceleration and extend the cruising range of electric vehicles by about 20%.

Knowledge popularization: driving steps of new energy vehicles, power-saving skills of pure electric vehicles-driving

The method of driving a pure electric vehicle is as follows:

Step one, start the car. When the key is turned to the ON position, the automobile instrument background light is all on and the low voltage is connected. Then press the key to start gear, and when you hear a beep, you can hear the click of the relay in the car battery pack, and the battery pack is connected at high voltage. The dashboard shows a ready green light and the car starts to drive.

Step 2, put down the handbrake and put the handle of the shift control mechanism in the D position. Gently step on the electronic accelerator pedal with your right foot and the car begins to move forward.

Step 3, if you need to brake, step on the brake pedal with your right foot; If you need to accelerate, step on the electronic accelerator pedal; If you need to drive at a constant speed, just keep the electronic accelerator pedal at a certain opening; If you need to reverse the car, first turn the shift control handle to N gear, and then turn the shift control handle to R gear after the car stops.

Knowledge popularization: driving steps of new energy vehicles, power-saving skills of pure electric vehicles-driving

The power-saving skills of pure electric vehicles are as follows:

First, always check the tire pressure of the car and keep the tire pressure level of the car. Soft or hard tires will affect the power consumption of the car.

Second, conduct 5S management on the trunk of the car, and promptly remove large items or sundries that are not often used in the trunk of the car.

Third, step on the gas pedal lightly and start slowly. We should form this driving habit when using cars every day.

Fourth, in the case of safe driving, try to maintain a medium speed of 60 to 80 mph.

Fifth, when the red light is on and you need to wait, the car gear is set to N and neutral.

Sixth, you don't need to turn on the air conditioner when driving in the city. Turn on the air conditioner instead of the window when the car is driving at high speed.

Knowledge popularization: driving steps of new energy vehicles, power-saving skills of pure electric vehicles-driving

Seventh, let the car slide with the inertia of the car. When the car is driving, put away the throttle and rely on the kinetic energy of the car, that is, the inertia or the potential energy when going downhill. It is worth mentioning that the car can't brake when taxiing, and the speed can't exceed 40 mph. In order to ensure the safety of the car.

Eighth, use less automobile braking, reduce emergency braking and adopt predictive braking. When it is estimated that it is necessary to slow down or stop, turn off the throttle in advance to slow down, and then accelerate after the situation is handled, which is both safe and energy-saving.