Rosewood is mahogany and rosewood furniture how to maintenance

There are many kinds of wood in the furniture, their respective characteristics are different, so be sure to understand clearly before buying, then the big leaf rosewood is mahogany, to understand it!

Da Ye Zitan is mahogany

It is mahogany. Also known as Lushi black sandalwood, big leaf rosewood grain than other sandalwood thick, and big leaf rosewood after polishing is also obvious brown eyes. The heartwood cut surface is reddish-orange at first, but will change from reddish-orange to dark purple with the passage of time. Big leaf rosewood tube holes compared with other rosewood is also relatively rough, and its tube holes in the naked eye is difficult to see, and big leaf rosewood diameter is also the largest in the 206μm, the average value is about 149μm.

Rosewood furniture how to maintain

1, the correct wipe

When furniture with Time is too long, the surface is also stained with some dust, in the wipe test dust, use a clean cloth, wipe along the wood grain, to prevent scratches in the wipe test, bring harm to the surface. In wiping, can not use wet cloth or coarse cloth, to prevent water penetration into the inside, there is a mold problem, so that the service life is reduced. When wiping, can not use detergent, to prevent the surface layer to bring corrosion, but also will reduce the gloss of the furniture.

2, placed in the appropriate

The hardness of rosewood will be higher, long time with no insects, but this is still afraid of ultraviolet rays, if the rosewood furniture for a long time in the direct sun, there will be drying, cracking and so on, in the placement of the furniture, should be placed in the shade, in the placement of the former, but also to ensure that the ground is flat, if it is uneven, after a long time! prone to deformation, loosening and other problems.

3, regular waxing

In use, but also regularly wax it. Usually, in March, September and December of each year this time to wax more appropriate. Before waxing, but also to remove the surface dust clean, to do a small number of times, so that the waxing effect is better.