What is a reasonable kitchen countertop height? What happens if it is too high or too low?

But if he is shorter, then don't design it so high, otherwise, every time you get something you need to move the ladder and the stool, and that is also more painful. The most important height is H1, the specific algorithm is H1 = height ÷ 2 + 50mm, which is suitable for your operating height. So the cabinet height design should fully take into account the height of the user, for example, the height of the workbench should be in the user in standing fingers can touch the bottom of the water basin, so that the height of the cabinet workbench is the most appropriate. If you do not understand the decoration, and did not discuss the issue with the cabinet manufacturers, basically give you the height of the installation is 850mm. but the general cabinet manufacturers will consult the customer's opinion.

By the limitations of height, the sink and cutting area should be 5 centimeters higher than the cooking area, so that the waist is not acidic work is not tired the height of the workbench should be the housewife standing fingers can touch the bottom of the water basin shall prevail. The design requirements for the kitchen must be carefully analyzed, not according to the so-called uniform standards! One of the easiest ways is to divide the height by two, which is the approximate height dimension! Who cooks more in the family, according to the height of this person to design.

The master of the master bang suggested that the countertops and cabinets between the bottom of the interval of 60 centimeters, and then choose the height of the cabinets in the 50 to 60 centimeters or so, the overall height of 2 meters or less, the bottom of the cabinets can reach the basic reach, put some of the more commonly used kitchen supplies, the top of the top can be placed on some of the less common items! So that the human hand touches the bottom of the basin when washing things just do not have to bend over, guide 930mm, cooker 760-780mm, so that when frying, just the elbow of the comfortable angle, chopping table should be appropriately high, 830mm can ensure that the elbow of the comfortable bending degree. Because people frying food will not have an uncomfortable feeling. Short people can be based on height, 800mm or so, are added to the countertop. The upper cabinet is basically around 750-850mm. Some people use brick, practical and save money, the cabinet is divided into many kinds of wood.