Why does the fishing rod "sweat"? How should anglers deal with this phenomenon?

In fact, the reason of fishing rod sweating is the temperature drop, because the temperature difference between water body and gas suddenly increases significantly, which causes water vapor to solidify after contacting cold air, but it solidifies into small water droplets in the rod body of fishing rod. Many friends who often fish have this experience, not only fishing rods, but also brackets, fishing boxes and fishing platforms. This kind of fishing gear with paint on the surface will have this situation.

Especially in the recent period before and after the winter solstice and the first frost solar terms, this situation is particularly obvious, not only in the morning and evening, but also in the daytime when cold air suddenly patronizes.

When the above weather occurs, due to the low temperature and high water temperature, a large amount of water volatilizes, which reduces the water pressure. Although the impact is small, the fish in the water will notice this change, so they will swim to the deeper waters farther offshore. In addition, a large amount of water volatilizes, which will lead to fog on the water surface, resulting in a decrease in dissolved oxygen in the water, and fish generally do not open their mouths. This is why it is difficult to fish in foggy days, but when the fog clears, the fish will be active again.

What's the use of the sweat absorption belt of fishing rod? Fishing rod is a tool to be used in fishing, which can play a very key role in fishing. When using fishing rod, there are some relatively small tools, which can also play a very key role, so that the fishing rod can play a better role and make the fishing process smoother. Sweat absorption belt is such a tool. Literally, its main function is to absorb sweat. You can wrap it around the fishing rod to absorb sweat.

In this way, after winding the sweat absorption belt, the fisherman can hold the handle of the fishing rod more firmly and stably when fishing. Moreover, the sweat absorption belt also has the function of anti-skid. If you sweat too much, the fishing rod is not easy to be caught, and the sweat absorption belt can avoid this situation. In addition, the sweat-absorbent belt itself can make the handle more comfortable and look more beautiful. In addition, it can also play a key role in protecting the handle of fishing rod, making its service life longer.

How to wrap the sweat absorption belt of fishing rod is a key tool, and their prices are not particularly expensive, so it is best to prepare for use in advance. When winding, you need to take the correct way: cutting the bevel angle: first, you need to prepare scissors, and then cut the bevel angle on the sweat-absorbing belt to make the sweat-absorbing belt fit the fishing rod better. The specific viewing angle is determined according to the circular diameter of the fishing rod handle, which is not completely determined.

Winding: after cutting, hold one side of the inclined plane and stick it at the end of the fishing rod handle, and then wind it evenly. After that, wind it slowly. When winding each turn, attention should be paid to maintaining a fixed viewing angle and spacing. You also need to cut an oblique angle at the end of the sweat absorption belt, and the viewing angle depends on the handle of the fishing rod. Fixation: After winding, in order to make the sweat-absorbing tape more firm, it is necessary to seal the winding tape with black tape, so that it is not easy to fall off.