Traditional Culture Encyclopedia - Traditional culture - What is the construction process and points of finishing tiles?

What is the construction process and points of finishing tiles?

Calculate how much money your home renovation

1, before construction, you should check in detail the varieties of finishing tiles, quality and specifications of the size of the construction needs, if found to have a problem, you need to be replaced in a timely manner. And also will be soaked in water for more than two hours in advance, after soaking, but also need to put it into a cool dry place, so that the surface moisture is dry.

2, before paving, you also need to locate a good line, and should be in advance according to the correct method of paving pre-arranged, in which the non-integral brick should be placed to the corner position or secondary position, so that the wall will not appear two columns of non-integral tiles, and non-integral tiles of the width of the entire wall should not exceed one-third of the size of the tiles.

3, before paving, be sure to vertical elevation and horizontal elevation are determined clearly, but also need to pad the bottom ruler, and to hang the line paving, and the corner of the brick pressure must be kept correct, the corner of the sun should try to be made into a begonia corner, so that the finish brick is less likely to appear bouncy corner phenomenon.

4, if the wall has a raised position, then you need to cut the decorative tile into the right size or shape, the edge must be kept neat, can not use the non-integral brick patchwork, otherwise the decorative effect of decorative tiles will inevitably decline.

5, paving tile, generally need to use to cement mortar, for this reason, before paving, but also need to be based on the correct proportion of cement mortar modulation, and must be modulated uniformly, in order to strengthen the paste effect of cement mortar, effectively preventing the appearance of drumming phenomenon of decorative tiles, but also can be appropriate to add some 108 glue.

6, paving the process of decorative tiles, cement mortar thickness should be six millimeters to ten millimeters, and cement mortar must be the back of the decorative tiles coated. In addition, can not be a one-time will be paved directly to the top of the decorative tile, otherwise the decorative tile is prone to collapse phenomenon.

Enter the area to get a free decoration quote