Straw power generation process

Two independent straw warehouses will be built in the power plant. Each warehouse has a gate, from which transport trucks can enter, and then stop on the weighbridge to weigh, and at the same time, the moisture content of straw should be detected. Any bag of straw with water content exceeding 25% is unqualified.

In European power plants, this kind of test is realized by infrared sensors installed on automatic cranes. In China, you can manually insert a detector in each straw bundle to test the moisture content. The detector can store 99 sets of measurement values. After measuring all the straw bundles, the measurement results can be stored in a computer connected to the weighbridge. Then unload the goods with a forklift and input the empty weight of the transport vehicle into the computer. The computer can calculate the net weight of straw according to the weight and water content before and after.

When the truck is unloading, the forklift will put the straw bag in the predetermined position; At the other end of the warehouse, the forklift wraps the straw on the feed conveyor; The feeding conveyor has a buffer table, which can keep the straw for 5 minutes; Straw is transported from the feeding platform to the feeding system by a feeding conveyor with a sealed gate (fire prevention); Straw coating is pushed onto two vertical screws, and the straw is torn by the rotation of the screws, and then conveyed to the screw automatic feeder, which presses the straw into the sealed feeding channel and then reaches the furnace. The furnace is a water-cooled vibrating furnace, which is specially developed for straw-burning power plants. Flow chart of straw gas power generation project: