What types of soft beds are there?

What kinds of soft bag beds are there? Let's take a look at Bian Xiao's sharing today.

1. Conventional traditional soft package: first, spread it with a bottom board (9 cm or 12 cm board), then add a foam pad with a thickness of 3~5CM on it, and then decorate it with cloth, artificial leather or leather.

2. Soft package of profile: firstly, fix the profile on the wall according to the required pattern, fill the sponge in the middle, and finally put the cloth or skin into the profile with a knife.

3. Leather carving soft bag: Leather carving soft bag is a new type of soft bag, which is hot-pressed at high temperature with a special mold. It is fashionable, flame-retardant and wear-resistant.

Details that should be paid attention to in the manufacture of bedside soft bag

There are some problems to be paid attention to in the production of soft bag background wall at the bedside, especially in the details. Bad details will affect the overall feeling, just like decorating the sideline is very important and valued. In the production process, the decorative board that needs to be moved forward can be installed after painting, but it cannot be installed directly. Before installation, you need to try to spell, and then you can know whether the material is suitable or not. Is it the same as design? After confirmation, the installation can be officially started, and then it can be fixed on the base, decorated with edges, and then brushed.

Expanding knowledge: the construction method of soft bag at the bedside of bedroom

1, the first step of soft bag construction at the bedside of the bedroom, determine the design drawings of soft bags, and clarify the specific practices of soft bag walls.

2. Start making soft bags, which can be divided into two methods, one is direct paving method, and the other is prefabricated mosaic paving method. The direct paving method is relatively simple to operate, but it requires higher flatness of the base or ground. Precast paving mosaic method is difficult, which requires that it must be horizontal and vertical, not skewed, and the size must be accurate. After determining the specific practice, calculate the materials and cut the bottom and fabric according to the design requirements. Then do a good job in construction, materials, tools and construction conditions.

3, paste the filler and fabric

(1) When the direct paving method is adopted, the fabric can only be pasted after the fine wood decoration of the wall is basically completed and the frame paint meets the handover conditions.

(2) If the prefabricated paving method is adopted, the fabric can be pasted in advance, which is not limited. First, paste the filler according to the design drawings and modeling requirements, then fix the filler cushion on the prefabricated mosaic floor, align the cloth up and down according to the positioning marks, and then paste the cloth.

4. Install the face-sticking or decorative sideline, first brush the paint as required, and then install the prefabricated decorative board. After trying to meet the design requirements and effects, you can use the base to fix the face or decorate the sideline, and finally brush the edge paint.

5, soft bag wall finishing. If the construction arrangement of the soft bag wall is relatively backward, the work of repairing the soft bag wall is relatively simple. If the construction is earlier, because the finished protective film is added, the finishing workload is larger. At this time, it is necessary to do a good job of dust removal and cleaning, nail the nail hole of the protective film and deal with the glue mark.

The above is what Bian Xiao shared today, and I hope it will help everyone.