Installation method of TV wall

Installation method of TV wall: 1, and the wall surface should be flat, which can be cement wall, gypsum board wall, putty wall, paint wall, blockboard wall, etc. , you can even paste flat tiles or glass;

2. According to the drawings, put them together on the ground first, and then paste them on the wall;

3. Apply a few pieces of neutral glass glue (not full) on the back of each mosaic, then stick a few pieces of cotton double-sided tape on the back, and then stick it on the wall. A piece of glass glue can stick 1-2 square meters.

4. Stick it on the wall according to the mosaic drawings provided by us and the order put together on the ground in advance, and pay attention to the gap between each piece is 0.5- 1MM (the gap is left to prevent the gap from expanding with heat and contracting with cold in the future), and the order is from bottom to top;

5. After the final paste, it is completely dried for 48 hours, which is very firm and stronger than cement;

6. There is no technical content in the pasting method, which can be pasted by general decoration workers (workers who can paste tiles usually paste them). If the area is not very large, you can DIY paste it yourself.