What are the precautions for using floating ball level gauge?

In order to ensure the normal and reliable operation of the floating ball level gauge, special attention should be paid to the following points when installing and using the floating ball level gauge:

1, the installation position should be far away from the liquid inlet, otherwise the floating ball will easily fluctuate due to liquid injection at the inlet, resulting in misoperation;

2. Keep vertical during installation to ensure that the floating ball can move freely up and down in the main pipe;

3. For the floating ball level gauge with a range of more than 3.5m, it is necessary to install a support ear at the bottom of the guide rod to strengthen the guide rod and keep it stable;

4. The zero point and full-scale position of the float level gauge are generally set according to the user's needs when leaving the factory. Please do not reset it at will when using it, so as to avoid inaccurate detection;

5. After using the float level gauge for a period of time, if the float is difficult to float or the float is not sensitive to movement, it is mostly due to the magnetism of the float, so that the float guide rod hole is stained with iron filings or other dirt. At this time, the float can be taken out after the medium is drained, and the iron chips or other dirt stained on the float can be taken out and reinstalled.