How does a novice ink a printer cartridge?

1. Remove the printer cartridge. Color printers have black ink cartridges and color ink cartridges, while black-and-white printers only have black ink cartridges;

2. Remove the label of the ink cartridge and stick it on the side or outside of the ink cartridge. We can see that there are five small holes on the ink cartridge cover, which are the corresponding colors of the color ink cartridge as shown in the figure, and any hole on the black ink cartridge can be refill kit;

3, open the ink, insert the syringe into the ink to extract ink, about 3ml of ink;

4. Use this to extract ink according to the corresponding color and add it to the ink cartridge. Note that different syringes are used for minutes of ink and cannot be mixed. Insert the syringe into the ink cartridge sponge shallowly, and slowly inject ink, so that the sponge is completely absorbed, so that it is not easy to add more, otherwise it will leak ink;

5. Stick the label of the ink cartridge back to its original place, and put the ink cartridge back to the printer for use.

Extended data:

Some suggestions on adding ink to printer cartridges;

1 to ensure that the filled ink cartridge is intact;

2. Avoid the ink cartridge of the inkjet printer being exposed to air for a long time, otherwise it will lead to dryness and blockage;

3. Try to use high-quality original ink for filling;

4. After the ink cartridge of the inkjet printer is full of ink, it is best not to put the ink cartridge back to the cartridge holder immediately.